Sold and Shipped by Everest Marketplace
Vortex Optics Sparc 2 Red Dot MOA Riflescope (SPC-402), Black
write review
read reviews
The highly compact, daylight bright Sparc II is packed with performance features and lends itself to a variety of platforms.
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
- Product Name: Vortex Optics Sparc 2 Red Dot MOA Riflescope (SPC-402), Black
- Shop by Brand: Vortex
-
Description: The highly compact, daylight bright Sparc II is packed with performance features and lends itself to a variety of platforms.
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
Customer Questions
No Questions
Everest Marketplace
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
$139.99
save today! Unlock discounts, earn points, FREE shipping, and more with Caliber Nation savings. Start 30-day free trial
In stock
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
customer support
1-866-806-0934
meet marcus
shop secure promise
securely processed
give back fund
give back fund
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
supporting outdoor causes
price match guarantee
price match guarantee
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
Found a lower price? We'll match it.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
customer support
1-866-806-0934
meet marcus
shop secure promise
securely processed
give back fund
give back fund
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
supporting outdoor causes
price match guarantee
price match guarantee
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
Found a lower price? We'll match it.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
The highly compact, daylight bright Sparc II is packed with performance features and lends itself to a variety of platforms.
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
- Product Name: Vortex Optics Sparc 2 Red Dot MOA Riflescope (SPC-402), Black
- Shop by Brand: Vortex
-
Description: The highly compact, daylight bright Sparc II is packed with performance features and lends itself to a variety of platforms.
A modular three piece base offers four seperate mounting heights for user and weapon specific customization. A high base and shim plate offer absolute and lower 1/3 co-witness mounting heights. A low base provides options for handguns or shotguns.
Fully multi-coated lenses offer a clear field of view and the unit is parallax free with unlimited eye relief. Elevation and windage turrets adjust the point of impact up and down or left and right.
Machined from aircraft-grade aluminum, the one piece body is rugged and lightweight providing shockproof performance withstanding recoil and impact. O-ring seals and nitrogen purging ensure the unit is water and fogproof in the field.
Rear facing power controls with only two buttons offer simplicity in use and adjustment of the 10 brightness levels available.
Product Overview
Sparc II Red Dot (SPC-402)
Get on target fast with the Sparc II. Ultra-compact and lightweight, the Sparc II (Speed Point Aiming for Rapid Combat) is equally at home mounted on a rifle or shotgun. Digital rear facing controls for powering on/off and adjusting the 2 MOA daylight bright red dot brightness at ten intensity levels-automatically returning to the last dot intensity used when powered up. Rugged single-piece body machined from aircraft grade aluminum is o-ring sealed for waterproof and fogproof performance. The VMX-3T Magnifier is Not recommended for use with the Sparc II.
The versatile multi-height mount system accommodates most firearms including rifles needing absolute or lower 1/3 co-witness heights, and mounts on standard Weaver or Picatinny bases (not included). A modular three-piece base offers four separate mounting heights for user- and weapon-specific customization: 18.0 mm (.709 inches), 21 mm (.823 inches), 37 mm (1.457 inches), 40 mm (1.575 inches).
Includes:
Multi-height Mount System, T-10 Torx Wrench, 7/64"e; Hex Wrench, CR 2032 Battery, Flip Cap Optics Covers
Daylight Bright Red Dot Reticle
The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings-the lowest two settings are night-vision compatible.
The key thing to remember when shooting with the Sparc II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!
Windage and Elevation Adjustments
The Sparc II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
1. Remove the dial covers.
2. Use the raised bars on the dial covers, coin or screw driver to make the adjustments.
3. Turn the adjustment dial in the appropriate direction as indicated by the arrows. Move the dials in the direction you wish the bullet’s point-of-impact to change.
Mounting the SPARC II
The Sparc II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. To get the best results from your Sparc II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.
1. Attach the Sparc II to the rail/base with the adjustment control buttons facing the shooter and make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Sparc III so you have at least four inches of eye relief.
2. Be sure the base clamp is hooked around the outside of the rail/ base.
3. Press the Sparc II downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.
Specs
Magnification: 1x
Objective Lens Diameter: 22 mm
Eye Relief: Unlimited
Adjustment Graduation: 1 MOA
Travel per Rotation:45 MOA
Max Elevation Adjustment: 90 MOA
Max Windage Adjustment: 90 MOA
Parallax Setting: Parallax Free
Customer Questions
No Questions
Everest Marketplace
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
ratings & reviews
Write a review
ratings & reviews
★
5
★
4
★
3
★
2
★
1
Write a review
Page of | Showing to
Total results
No results!!
