ADE Spike Micro Green Dot Sight for RMS/RMSC Sprint Optics Pistol Listed as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X, Ruger Max-9, Glock 43MOS/48 MOS, Springfield Hellcat OSP/PRO
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6"e; x (Width).92"e; x (Height).93"e;
Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- Product Name: ADE Spike Micro Green Dot Sight for RMS/RMSC Sprint Optics Pistol Listed as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X, Ruger Max-9, Glock 43MOS/48 MOS, Springfield Hellcat OSP/PRO
- Shop by Brand: Ade Advanced Optics
-
Description: This is ADE’s new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6"e; x (Width).92"e; x (Height).93"e;
Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. - Special Price: $99.99
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
save today! Unlock discounts, earn points, FREE shipping, and more with Caliber Nation savings. Start 30-day free trial
In stock
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6"e; x (Width).92"e; x (Height).93"e;
Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- Product Name: ADE Spike Micro Green Dot Sight for RMS/RMSC Sprint Optics Pistol Listed as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X, Ruger Max-9, Glock 43MOS/48 MOS, Springfield Hellcat OSP/PRO
- Shop by Brand: Ade Advanced Optics
-
Description: This is ADE’s new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6"e; x (Width).92"e; x (Height).93"e;
Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike’s rear white dot will act as a pistol factory original rear sight for Co-Witness.
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. - Special Price: $99.99
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
